On-line sulfur analyzer
X-Ray absorbtion sulfur analyzer SPECTROSCAN IS is for sulfur determination from 0,1% up to 5,5% in oil stream.
Oil enters a flowcell designed for a pressure up to 63 bar and flow rate up to 200 l/m where is being X-rayed and which is attenuated by the oil flow and recorded by a detector.
The signal registered by a detector is being automatically recalculated by the built-in computer into the mass fraction of sulfur.
The analyzer is used for supervising during the transportation and storage of oil as well as during the mixing procedure.
SPECTROSCAN IS can be placed both as part of the Crude Quality Measurement Unit, the Crude oil custody transfer metering system and autonomously.
Mechanically the analyzer is a complete factory-ready product with a building block construction and includes all nesessary functional devices for efficient and safe operarting.
Mechanically the analyzer is a complete factory-ready product. Can be supplied in two modifications: module block and monoblock.
The analyzer might has the following options:
- In a detection range from 1,0 up to 6,0 % ±0,04.СS
Where СS - certified value of mass fraction of sulfur in CRM, %
Model 2 – from minus 20 up to + 40
- Mass fraction of water;
- Mass fraction of water;
- Oil temperature in flowcell.
- overpressure relief valve;
- drainage and / or drainage valves through a separate circuit.
SPECTROSCAN IS is a proprietary development of NPO SPEKTRON (St. Petersburg), produced using predominantly domestic units and components, manufactured in explosion-proof design.
- The analyzer is fully automated, does not require daily maintenance;
- Operating temperature from -20 to + 40 ° C;
- The possibility of changing the measurement time to improve the speed of monitoring;
- The analyzer has explosion, X-ray and electrical safety certificates;
- Taking into account the effect of density, water content and chloride salts on the analysis results;
- The possibility of cleaning the flowcell with hot steam at a temperature of 180 ° C.
Vacuum wavelength dispersive X-ray fluorescent WDXRF scanning spectrometer for determination of chemical elements in the range from Na (Sodium) to U (Uranium) in various substances.
Wavelength dispersive X-ray fluorescence WDXRF analyzer for sulfur determination in automobile fuel as well as in petroleum and petroleum products.
Wavelength dispersive X-ray fluorescence WDXRF analyzer for organic chlorides determination in oil.
Energy dispersive X-ray fluorescence analyzer EDXRF of sulfur in petroleum and petroleum products.
Wavelength dispersive X-ray fluorescent WDXRF scanning spectrometer for determination of chemical elements in the range from Ca (Calcium) to U (Uranium) in various compounds.
WDXRF analyzer for determination for S, Mn, Fe, Pb, in automobile fuel, as well as in any petroleum distillate.
Ultraviolet fluorecence sulfur analyzer SPECTROSCAN UFS is for sulfur determination in liquid homogeneous oil products.
SPECTROSCAN GEO is a portable (hand-held) instrument designed for X-Ray fluorecence testing of heterogeneous geological features (ore minerals, rocks,soils) without sampling and samples preparation for analysis.
SPECTROSCAN МАКС-GF1(2)E" is a modification of WDXRF "SPECTROSCAN МАКС-G" spectrometer with one or two additional EDXRF channels.
SPECTROSCAN МАКС-GF1(2)E-C is a modification of SPECTROSCAN МАКС-GF1(2)E spectrometer with one or two additional EDX channel and with a special sample changer suitable for various expertise.